Rain or Shine Hi-Gloss

257.003,738.00

SKU: N/A Category:

Rain or Shine Hi-Gloss

Diamond Shine

 

Rain or Shine Hi-Gloss Topcoat is a water-based waterproofing topcoat for interior and exterior concrete surfaces. It is resistant to ultra-violet light, dirt, dust and temperature varations. Used in conjunction with Rain or Shine Wall Mastic Extreme Waterproofing Paint or Rain or Shine Elasto-Proofer or Rain or Shine Elasto-Tex, it can bridge hairline cracks of vertical concrete walls and prevent efflorescence. It has excellent gloss retention and adhesion to well-prepared concrete surfaces.

 

Material Description:

Use:

Topcoat for concrete substrate

Appearance:

Gloss

Coverage:

20-25 sq. per 4 litres depending on the texture of the surface

Application Method:

Brush or Roller

Reduction:

Use as package viscosity

 

Application:

For new concrete:

New concrete should be given enough curing time ranging from one week to one month to reduce water and alkali to a safe level. Excess alkalinity should be neutralized with Concrete Neutralizer. Allow the surface to dry thoroughly. Dust off crystalline deposits if there are any.

Apply (1) coat of Rain or Shine Wall Mastic Extreme Waterproofing Paint or Rain or Shine Prepa-White (ROS-7000) or Rain or Shine Elasto-Proofer (ROS-8000) or Rain or Shine Elasto-Tex (ROS-9000).

Repair all minor surface imperfections with Rain or Shine Power Putty (ROS-5000) after the first coat of Rain or Shine Wall Mastic Extreme Waterproofing Paint or Rain or Shine Prepa-White (ROS-7000) or Rain or Shine Elasto-Proofer (ROS-8000) if needed. Drying time of Rain or Shine Power Putty (ROS-5000) depends on the wet film thickness of the applied putty. Let dry and then sand.

Apply two (2) coats of Rain or Shine Hi-Gloss Elastomeric Topcoat Paint. Allow 2-4 hours drying in between coats.

Renovation/Repainting:

Remove any flaking or peeling paint. Clean and sand old paint in good condition and dust-off before repainting.

Apply (1) coat of Rain or Shine Wall Mastic Extreme Waterproofing Paint or Rain or Shine Prepa-White (ROS-7000) or Rain or Shine Elasto-Proofer (ROS-8000) or Rain or Shine Elasto-Tex (ROS-9000).

Repair all minor surface imperfections with Rain or Shine Power Putty (ROS-5000) after the first coat of Rain or Shine Wall Mastic Extreme Waterproofing Paint or Rain or Shine Prepa-White (ROS-7000) or Rain or Shine Elasto-Proofer (ROS-8000) if needed. Drying time of Rain or Shine Power Putty (ROS-5000) depends on the wet film thickness of the applied putty. Let dry and then sand.

Apply two (2) coats of Rain or Shine Hi-Gloss Elastomeric Topcoat Paint. Allow 2-4 hours drying in between coats. Increasing the number of coats will effectively improve the waterproofing capability and durability.

 

Caution:

Application is strictly prohibited if ambient temperatures are expected to fall below 28ºC or if rain is expected before the curing time of application has passed.

Code

ROS-HG-673, ROS-HG-100

Size

1L, 4L, 16L

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews
Shopping Cart