ABC Silicone Sealant
Glazing Grade 300mL

275.00

THE ABC GLAZING GRADE SILICONE SEALANT ADVANTAGE

  • Low Modulus
  • Non-slumping
  • Waterproof
  • Superior adhesion
  • Air tight
  • UV & Weather Resistant
  • Permanently Elastic
SKU: ABC-SSGG Category: Tags: , , ,

ABC SILICONE SEALANT GLAZING GRADE is a room temperature vulcanizing (RTV) acetic acid cure silicone sealant with outstanding adhesive strength. It is suitable for universal indoor/outdoor applications such as glass to aluminum and other non-corrosive metals, all glass construction such as curtain walls, store fronts, windows, glass blocks & glass cages, double glazing windows, filing gaps around door & window frames, insulation finishing system, aquariums and sanitary ceramics.

CLASSIFICATION STANDARD

  • DIN 18545 (D) German Institute for Standardization
  • TT-S-00-1543A (USA) American National Standards Institute
  • ISO 8690 (UK) International Organization for Standardization
  • BS 5889 (GB) Base Station Conformance Testing

TECHNICAL DATA

Uncured

The Following data is intended as guideline and not for preparing specifications.

Cured

Specimen measured after 4 weeks storage at 23 ℃ / 50% relative humidity.

SURFACE PREPARATION

The surface must be fully cured & structurally stable. Make sure the surface is dry, clean and free from contaminants such as dirt, dust, loose material, oils and chemicals.

TIP: For cleanest possible result and a perfectly straight line sealant application, especially in hard-to-reach places, use masking tape. Apply the tape covering both sides of the line to be sealed, and then remove the tape before the sealant is dry.

APPLICATION GUIDE

1. Application

a. Use a standard caulking gun to dispense the sealant. Note:The use of a caulking gun ensures even distribution for a professional finish.

TIP: Hold the sealant gun at an angle of 45° while pulling the gun towards yourself. Find the right working speed to properly fill the necessary gaps.

b. Ensure the sealant is in contact with both sides of joints and gaps. Use foam backer rods to establish good bonding at the sides and to control the depth of the sealant.

2. Finishing Remove excess sealant and tool with flat knife. Depending on humidity & temperature, applied sealant is touch dry after 30 minutes.

Note: Protect from water exposure for at least 4 hours after application.

APPLICATION AREAS

PACKAGING
300ml cartridge
STORAGE & SHELF LIFE

Store in a cool dry place. ABC Silicone Sealant Glazing Grade will remain usable one year from date of manufacture.

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews
Shopping Cart