MULTIBOND is a high strength ready-to-use water-based vinyl, carpet & wood adhesive, suitable for installations of various decorative floor and wall finishes. Its advanced polymer technology ensures high bonding strength – twice the bonding strength of contact cement. Its thick formulation with body allows it to correct minor surface imperfections and fill gaps between the substrate for an even and professional finish. MULTIBOND is an ABC eco-friendly product which has low Volatile Organic Compound (VOC) levels bearing little or no adverse effects to the environment. Majority of its components are natural and contain no harmful chemical additives & odors, creating a safe living environment for you and your family.
The surface must be fully cured, structurally stable and level. Make sure the surface is clean and free from contaminants such as dirt, dust, loose material, oils and chemicals. If needed, acid etch the surface area to be applied (e.g. on existing polished or waxed floors).
Spread MULTIBOND over a clean and dry surface and comb evenly with a recommended notched trowel. Note: Using a notched trowel will prevent lump formation, as it enhances the adhesive’s body to correct minor surface imperfections.
Wait 15 minutes, then positioning each piece of vinyl tile or parquet before tamping with a rubber float.
4kg plastic container
STORAGE & SHELF LIFE
Store in a cool dry place. Multibond Vinyl, Carpet & Wood Adhesive will remain usable one year from date of manufacture.