ABC TILE ADHESIVE Original
is a cement-based adhesive designed for bonding all kinds, types & sizes of tiles (earthenware, porcelain & mosaic tiles) and stoneware for floor and wall tile installations on indoor and outdoor concrete surfaces using the thinbed method. Only high quality aggregates and selected chemical additives are used strictly conforming to International Standards.
Gray & White
- ANSI A118.1 (USA) American National Standards Institute
- EN 12004 : 2000 (EU) European Standard
- PNS ISO 13007 – 1:2005 Type C1 (PH) Philippine National Standards
The surface must be fully cured, structurally stable, level, even, clean and free from contaminants such as dirt, dust, loose material, oils and chemicals. The use of a spirit level bar is essential to ensure levelness and / or plumbness of the surface. For painted surfaces, acid etch or abrade paint to ensure proper bonding.
Caution: Use only non-absorptive materials as mixing base (plastic pail or galvanized iron sheets). If absorbent materials such as plywood, wooden box, gypsum board, fiber cement board or cardboard is used, it will affect the chemical properties of the product, which can result in bonding failure and poor product performance. Use ONLY non-absorbent materials such as plastic pail or galvanized iron sheet as mixing base. Pour water into container and add ABC TILE ADHESIVE Original powder. Stir to attain a smooth, lump-free and pasty consistency. Let it rest for 15 minutes & restir briefly before use.
Dampen surface before application. Use a notched trowel to spread mortar evenly over an area of 1m2 at a time to produce a ribbed thinbed.
Install tiles within the open time. Adjust and align tiles. Use a rubber mallet to apply pressure on the tiles. NOTE: Do random checks if the back of the tiles are fully covered with tile adhesive. Check if tile adhesive mortar still adheres to your finger to find out if the open time has not lapsed. If open time has lapsed, DO NOT add newly prepared tile adhesive to a previously mixed batch. Remove old tile adhesive layer and reapply a new one to avoid bonding failure. TIP: Use tile spacers for uniform grout lines. A tile joint width is needed to accommodate possible tile movement due to thermal deformation, substrate shrinkage or tile expansion, thus preventing the tile from cracking.
5 kg and 25 kg bag
STORAGE & SHELF LIFE
Store in a cool dry place. ABC Tile Adhesive Original will remain usable one year from date of manufacture.